Bill's Hot Rod 1100 Series Air Conditioning Bracket

Bill's Hot Rod 1100 Series Air Conditioning Bracket

These side mount alternator and a/c brackets are designed for the Small Block Chevy using late style heads (1970 & Later). They position the alternator and a/c units over the exhaust manifold and just to the outside edge of the valve covers, which allows for a lower profile look. Most intake manifold combinations will work with these brackets.

The brackets mount using only the existing factory drilled holes found on the front face of the heads, therefore no drilling of tapping is required.

All brackets are available in either a short of long water pump version, except for the passenger side alternator bracket which is available for the short water pump only.

The alternator used is a GM and the a/c compressor is a Sanden SD-508. Stock steel or aluminum aftermarket pulleys can be used with these brackets.

For strength and durability, these brackets are made of 1/4" mild steel plate, finished off in your choice of black powdercoat or chrome plating.

Each 1100 Series bracket comes completely assembled, with an adjusting arm, all the necessary stainless steel washers and allen head bolts, an illustrated instruction sheet, belt size recommendations and adjusting tips for an easy installation.